Tile Adhesive & Tile Grouts

GENERAL DESCRIPTION

SYSTILE 451 is a adhesive having an unique formulation which gives its great adhesive property in fixing tiles. The special product is also suitable for the bonding of different construction materials in interior and exterior areas.

ADVANTAGES

• Highly workable & can be easily applied.
• Gives an impermeable layer.
• Has special additives which minimizes shrinkage in the system.
• Can be used to bond gypsum boards & styro foam to other substrates.

AREAS OF APPLICATION

SYSTILE 451 can be used to lay Ceramic tiles, Mosaic tiles, Quartz tiles, Terrazzo tiles on to all type of surfaces. It can be used for Balconies, Terraces, Floors, Wetrooms etc.

PROPERTIES
Base:Cement with modified special polymers.
Colour:Grey.
Working Temperature:+ 5 0 to 30°C.
Pot life:Approximately 112 to 2 Hours.
Movement Absorption:Nil.
METHOD OF USAGE
SURFACE PREPARATION

The surface has to be clean from dust, grease and oil . Use SYSCONS range of cleaning agents for the purpose. All crevices, holes in the substrate have to be filled up and levelled. For best results the surface should be slightly moist. During application, surface has to be free from rising dampness and other hydrostatic pressure.

MIXING AND APPLICATION

SYSTILE 451 should be mixed with water in the ratio of 3:1 by volume. Water has to be increased or decreased slightly to arrive on the required consistency. A slow speed drill fitted with a suitable paddle is recommended.

SYSTLE 451 is spread on the substrate to a uniform thickness of 2 – 3mm. This is trowelled horizontally with a notch trowel. The tiles are then placed firmly in to the adhesive bed ensuring good contact with the mortar. Mix only mortar within the stipulated 20 minutes at 30 degrees centigrade for best results.

COVERAGE

Approximately 3Kg of SYSTILE 451 is required per Sq.mtr when uniformly applied at 3mm thickness.

STORAGE

SYSTILE 451 must be stored in cool and dry place.

CLEANING

The SYSTILE 451 has to be removed from the tools at the earliest before it hardness by cleaning with water.

PRECAUTIONS

SYSTILE 451 is non-toxic, non-flammable. Contact with skin is to be avoided. Splashes on the eyes have to be immediately cleaned with water and medical has to be taken.

SUPPLY

15 Kg & 25 Kg Packs

SHELF LIFE

6 Months from the date of Manufacture

TECHNICAL SUPPORT

Technical information and guidance regarding SYSPLAST range of Admixtures, SYSCOAT range of Epoxy and Water Proofing Systems, SYSGROUT range of Grouts can be obtained from the technical cell of SYSCONS.

NOTE

Information in this Technical data sheet is to the best of our knowledge true and Accurate. However such conditions under which our products may be used or obtained beyond our control, recommendations are made without Warranty or Guarantee.

DESCRIPTION

SYSTILE Grout is ready to use Coloured Cementitious Powder containing special ingredients to solve the problems of convential material.
SYSTILE GROUT is recommended for use as a gap filling material between different Tiles like Glazed Wall tiles, Floor tiles, Marble tiles, Vitrified tiles etc.

ADVANTAGES

• Crack proof.
• Water Proof.
• Excellent Bonding.
• Durable.

INSTRUCTIONS OF USE

After Laying the Tiles with SYSTILE 451, Tile Adhesive, it is recommended to maintain the Specified Gap between them. Clean the Tile Gap so that there is no foreign matter in the Gap where the Material has to be placed. Mix the Tile Grout material with 350 ml to 400 ml of Water depending upon the site requirement in order to get the desired pasty consistency.

Ensure that there are no lumps & desired uniform Colour is obtained. To get Consistency some water may be added. For Mechanical Mixing air entrainment has to be avoided in the Paste. After mixing apply the paste by using a float so that the Material fills totally in to the gap and compact well to avoid any void formation. Use always the grout on a small area at a time so that the excess grout can be cleaned from the Tile surface at the earliest by using wet sponge.

Before cleaning the tile surface, wait for a minimum 15 minutes. During cleaning, move the sponge crosswise to the joints and not along to the joints. The Material should be used within the workable time.
Allow the grout to set finally, wash the tile surface with a clean cloth to remove any remaining paste.

COVERAGE

Coverage will depend on the Width & Depth of the Joint of Tile surface.
For a Tile of 6″ x 6″ of 2mm joint Approximately 1 K.g of Grout will give a coverage of 4 Sq.mtrs .

PRECAUTIONS

Filling of joints should be done after 24 Hours of Tile Fixing & Usage of Toilets should be done after 24 Hours of Tile Packing.

COLOUR AVAILABILITY

White, Ivory, Cream, Mushroom, Pink, Light Green, Blue, Brown, Terracotta, Grey, Terrared, Coffee Brown, Magenta, Yellow etc.

STORAGE

Storage of the material should be in Cool & Dry place.

PACKING

SYSTILE GROUT is supplied in 1 K.G Pack.

SHELF LIFE

SYSTILE GROUT has to be used within 12 months from the date of Manufacture.

TECHNICAL SUPPORT

Technical information and guidance regarding SYSPLAST range of Admixtures, SYSCOAT range of Epoxy and Water Proofing Systems, can be obtained from the technical cell of SYSCONS.

NOTE

Information in this Technical data sheet is to the best of our knowledge true and Accurate. However such conditions under which our products may be used or obtained beyond our control, recommendations are made without Warranty or Guarantee.

DESCRIPTION

SYSTILE GROUT EP is a Three Component Epoxy Resin based Tile Grout specially made of Epoxy Base (Part A), Hardener (Part B) and a modified Filler of selected graded aggregates(Part C).

ADVANTAGES

• Excellent Free Flow Characteristics
• Excellent Chemical Resistance
• High Early & Ultimate Strength 
• Non – Shrink
• Crack Resistant
• Excellent Bonding Durable
• Easy to apply
• Uniform Color

USES

SYSTILE GROUT EP can be used in the areas like Kitchens, Bathrooms, Floor & Wall Applications, Wash areas, Swimming Pools etc. Interior & Exterior use.

INSTRUCTIONS OF USE

After Laying the Tiles with Tile Adhesive, It is recommended to maintain the Specified Gap between them. Clean the Tile Gap so that there is no foreign matter in which the Material has to be placed.

All components of SYSTILE GROUT EP has to be mixed thoroughly and care should be taken to see the homogeneity of the mixed SYSTILE GROUT EP. Mixing of the material has to be done by using Mechanical Mixer and used within the stipulated Pot life.

It is absolutely forbidden to use any other ingredient other than provided the three-pack system. The system is almost self-compacting and self-leveling as such it does not require any vibration or the compaction.

SUPPLY

1Kg & 5 Kg Pack

COLOUR AVAILABILITY

White, Ivory, Cream, Pink, Light Green, Blue, Brown, Terracotta, Grey, Coffee Brown, Magenta, Yellow etc. 

STORAGE

Storage of the material should be in Cool & Dry place.

SHELF LIFE

SYSTILE GROUT EP has a Shelf Life of 12 months from the date of Manufacture.

COVERAGE

Coverage will depend on the width & Depth of the Joint of Tile surface.

PRECAUTIONS

SYSTILE GROUT EP should be applied at Ambient Temperature. SYSTILE GROUT EP should not come in contact with skin and eyes. Gloves, goggles and dust mask should be worn. If contact with Skin wash with plenty of Water & Soap. Splashes to the eyes should be washed immediately with plenty of water and medical advice sought.

TECHNICAL SUPPORT

Technical information and guidance regarding SYSGROUT range of Cementitious & Epoxy Grouts, SYSBOND range of Epoxy, S.B.R and Acrylic Bonding agents, SYSCOAT range of Coatings can be obtained from the Technical cell of SYSCONS.

NOTE

Information in this Technical data sheet is to the best of our knowledge true and Accurate. However, such conditions under which our products may be used or obtained beyond our control, recommendations are made without Warranty or Guarantee.

PRODUCT DESCRIPTION

SYSTILE GROUT ADMIX is designed to used in place of water to provide a dense, color fast Grout joint that inhibits stain causing bacteria.

APPLICATION

Used in place of water, SYSTILE GROUT ADMIX improves the performance of Portland Cement Grouts for all types of ceramic tile, brick, marble, natural stone and agglomerate stone installations.

ADVANTAGES

• Inhibits stain causing bacteria
• Easy to clean.
• Inhibits powdering and cracking.
• Reduces problems with faded color in Grouts.
• Water and frost resistant.
• Reduces staining.
• Reduces absorption.
• Designed for interior and exterior use.
• Improve Flexibility.

SURFACE PREPARATION

Before Grouting, remove spacers and debris in Grout Joints and remove dust and dirt using a wet sponge. Do not leave water standing in Joints. Substrate temperature must be at regular room Temperature.

MIXING

Stir or shake SYSTILE GROUT ADMIX thoroughly before use. Add SYSTILE GROUT Powder to proper amount of SYSTILE GROUT ADMIX and mix by hand or with a slow speed mixer (<300 RPM) to get a smooth, stiff consistency.

APPLICATION

Dampen tile surface with water. Spread with a sharp, firm rubber grout float. Place the Grout into the Joints until completely filled. Ensure that Joint is filled and Grout is not just sitting on top.

CLEANING

Remove excess Grout from the face of the tiles with the edge of the Grout float. Remove remaining Grout with a damp sponge (not wet) or a damp towel. Allow to dry.

PACKAGING

400 ml & 5 Ltr Containers.

SHELF LIFE

Packed containers of this Product are guaranteed to be of first Quality for a Minimum period of 12 Months at Room Temperature.

LIMITATIONS & PRECAUTIONS

• Not for use in areas exposed to harsh chemicals. Use SYSTILE GROUT EP Industrial Epoxy Grout for chemical resistance.
• Certain types of tile may be stained by pigment during grouting. Prior to grouting, do a test area to verify clean ability of tile. A sealer or grout release may be required.
• During cold weather, protect finished work from traffic until fully cured.

MAINTENANCE

SYSTILE GROUT ADMIX and SYSTILE GROUT EP materials require no maintenance but proper installation as per instruction. Performance and durability may depend on properly maintaining of Installed area.

TECHNICAL SUPPORT

Technical information and guidance regarding SYSGROUT range of GROUTS, SYSCOAT range of Epoxy and Water Proofing Systems, can be obtained from the Technical cell of SYSCONS.

NOTE

Information in this Technical data sheet is to the best of our knowledge true and Accurate. However such conditions under which our products may be used or obtained beyond our control, recommendations are made without Warranty or Guarantee.