- Excellent Adhesive Strength.
- Increase in Tensile Strength.
- Can be applied on Damp Surfaces.
- High Mechanical Strength.
Areas Of Application
Bonding Old Concrete to New Concrete. Ideal for repair or Exdended Structural Concrete in factories, Loading bays, Bridges, roads, bonded or Granolithic floor Toppings etc.
Method of Usage
The surface has to be clean from dust, Grease or Oil. Use SYSCONS range of Cleaning agents. After removing dust with water don’t allow water to collect on the surface where SYSBOND 757 has to be applied.
The Hardener part has to be totally poured in to the Base container. The two parts have to be thoroughly mixed with a low speed mixer (300 to 400 rpm) for about 2 to 3 minutes. Mixing has to be done until a uniform colour is obtained. Mixed material should be applied by brush on the well-prepared surface. Concrete has to be placed on SYSBOND 757 within 6 to 8 Hours.
The Coverage of the Material is 2. 2 Sq. Mtrs per Kg depending on the substrate.