Miscellaneous Products

DESCRIPTION

SYSRELEASE 981 is a high Quality solvent free Mould releasing agent. SYSRELEASE 981 forms a film which enables easy stripping of form work from concrete. SYSRELEASE 981 provides fair faced, stain free concrete together with easy stripping of moulds.

ADVANTAGES

• Ensures good Quality concrete with sharp corners.
• Easy to apply.
• Plasters, Screeds can be applied later on the surface as there will not be any Bonding problem.
• Can be used in precast Industry & places with steam curing.
• Can be used on all kind of moulds.
• Protects wooden form work from absorbing water & swelling & Steel form work from corrosion.

PROPERTIES
Pot Life:30 Minutes at 30 degrees Centigrade.
Base:Blended Mineral Oils.
Colour:Pale Straw.
Specific Gravity:0.83 to 0.85.
Harmful:No Harmful contents.
Contents:Chloride free hence does not affect RCC.
AREAS OF APPLICATION

• All kinds of Form Work used for Concreting.
• Moulds in the Precast Industry.
• Moulds for casting concrete in hot weather conditions.

METHOD OF USAGE

SYSRELEASE 981 should be applied on moulds after cleaning them. SYSRELEASE 981 can be applied by brush, sponge, conventional mould oil spray or by cotton waste. SYSRELEASE 981 should be applied only in concentrated form and should not be diluted with water. The Coverage is Approximately 40 — 50 m2 per Litre. Excessive application should be avoided.

PRECAUTIONS:

Gloves should be worn when using SYSRELEASE 981. Avoid contact with skin. If SYSRELEASE 981 by chance falls on skin, wash immediately with plenty of water. Splashes on to eyes have to be washed with plenty of fresh water immediately and medical advice has to be taken.

SUPPLY

SYSRELEASE 981 is supplied in 200 Litre Barrels, 20 Litres & 5 Litres Containers.

SHELF LIFE

1 Year from the date of Manufacture.

TECHNICAL SUPPORT:

Technical information and guidance regarding SYSPLAST range of Admixtures, SYSCOAT range of Epoxy and Water Proofing Systems, SYSGROUT range of Grouts can be obtained from the Technical cell of SYSCONS

NOTE:

Information in this Technical data sheet is to the best of our knowledge true and Accurate. However, such conditions under which our products may be used are obtained beyond our control, recommendations are made without Warranty or Guarantee.

DESCRIPTION

SYSCLEAN 982 is a highly concentrated liquid cleaning agent. The modified Organic acid with special additives loosens cement, dust, Concrete mortar & lime remainders. Can be used for etching concrete floors & surfaces before applying surface coating.

ADVANTAGES

• Quickly removes/loosens the Cement dust, concrete remainders.
• SYSCLEAN 982 can be used even in the area of Food industry.

PROPERTIES
Base:OrganicAcid.
Colour:Colour Liquid.
AREAS OF APPLICATION

• Can be used as a Cleaning agent to remove Cement dust on Tiles.
• Can be used to Clean Swimming Pools, Ceramic tiles, granite stone tiles, Marble etc.
• Can be used to remove concrete dust and any other dust on floors so as to have a clean surface for applying floor coats.
• Can be used to remove Cement— Concrete, dust in food industries, drinking water storage areas.

METHOD OF USAGE

SYSCLEAN 982 has to be applied only in dilute form. Depending upon the type of dust, normally the dilution should be 1:10 to 1:3. As soon SYSCLEAN 982 comes in contact with Cement dust, its cleaning effect starts.

The action can be seen by means of foam formation. The removed material is rubbed & washed off with clean water immediately. If necessary the cleaning has to be repeated.

NOTE:

Should not be used with limestone, Sand stone etc.
Metallic surface should be immediately washed with plenty of water after using SYSCLEAN 982.
Many substrates may be effected in colour. So test the material at site and then use for larger areas.

PRECAUTIONS

SYSCLEAN 982 is corrosive material. It must be always applied with Rubber gloves and goggles. Avoid contact with skin. If SYSCLEAN 982 by chance falls on skin, wash immediately with plenty of water. Splashes on to eyes have to be washed with plenty of fresh water immediately and medical advice has to be taken.

SUPPLY:

1 Litre, 5 Litres & 20 Litre Containers.

SHELF LIFE:

1 Year from the date of Manufacture

TECHNICAL SUPPORT

Technical information and guidance regarding SYSPLAST range of Admixtures, SYSCOAT range of Epoxy and Water Proofing Systems, SYSGROUT range of Grouts can be obtained from the technical cell of SYSCONS.

NOTE

Information in this Technical data sheet is to the best of our knowledge true and Accurate. However such conditions under which our products may be used or obtained our control, recommendations are made without Warranty or Guarantee.

DESCRIPTION

SYSPLUG 954 is supplied as a dry product needing only the addition of water to produce an ultra rapid set plugging mortar.
SYSPLUG 954 is modified cement consisting a blend of selective additives, graded aggregates, cement and fillers, which control the rate of setting time.

ADVANTAGES

• Rapid setting.
• Easy to use.
• Durable.
• Chloride free.
• Stable.
• Minimizes Thermal cracking.
• Excellent Bonding capacity.

PROPERTIES
Initial setting time:Approx1 to 2 minutes at 30 degrees Centigrade
Compressive Strength:25 N/mm2 at 28 days at 30 degrees Centigrade
APPLICATION AREAS

SYSPLUG 954 is used for the rapid temporary patching and plugging of concrete segments, sewage systems, below ground access chambers, basements, foundations etc.

METHODS OF USAGE

Surface Preparation The areas which has to be treated, has to be cleaned properly so that is free from loose material, dust and laitance. To seal leaks, crack openings must be done in the form of V – groove.

MIXING

SYSPLUG 954 should be added to water in the ratio of 1: 3 (Water: SYSPLUG 954) measured by volume. Mix to a stiff consistency in a suitable manner. Prepare a minimum quantity of mortar which can be placed within the prescribed set time of avoid property of rapid setting.

APPLICATION

Apply the mixed material with the help of a towel or by hand by ensuring maximum contact with the substrate before the material sets. If being used to plug the running water SYSPLUG 954 should be used and held in place until the initial set is reached.

CLEANING

SYSPLUG 954 should be removed from tools and equipment with water after use. Hardened material can be removed mechanically.

PRECAUTIONS

SYSPLUG 954 is Non-toxic, Non-flammable. Avoid contact with skin. If it splashes on to the eyes they have to be immediately washed with water and medical advice to be taken.

SHELF LIFE:

12 Months in unopened packs if kept in dry condition

SUPPLY:

5 Kgs Pack.

TECHNICAL SUPPORT

Technical information and guidance regarding SYSPLAST range of Admixtures, SYSCOAT range of Epoxy and Water Proofing Systems, SYSGROUT range of Grouts can be obtained from the technical cell of SYSCONS.

NOTE

Information in this Technical data sheet is to the best of our knowledge true and Accurate. However such conditions under which our products may be used or obtained our control, recommendations are made without Warranty or Guarantee.

DESCRIPTION

SYSCURE 985 is a Wax based compound which when applied on concrete forms a seamless film and aids in arresting the evaporation of water from the capillaries of concrete.
SYSCURE 985 is White (Pigmented)

ADVANTAGES

• Good Solar reflectance, which keeps the concrete, temperature low, especially helpful during the early stage of concrete.
• Easy to apply, saves on labour costs.
• It does not contain any contamination like Chloride, Sulphate etc., and does not effect the setting time of concrete.

STANDARDS

Complies with ASTM C309-74 & BS 7542 — 1992.

AREAS OF APPLICATION

Can be used in all areas of concrete where there is shortage of water and efficiency of curing to improve, also in segments of concrete where day to day monitoring of curing is not possible. Overhead curing of inaccessible places like chimneys, critical vertical joints etc.

METHOD OF USAGE

SYSCURE 985, Curing compound has to be applied as soon as possible after casting, usually when we find the concrete has reached touch dry stage, i.e. all the bleed water evaporates and water screen disappear from the surface.

For unexposed Concrete surface i.e. which is covered by formwork which has to be applied immediately after deshuttering the concrete members.

While doing applications with nozzle, the spraying nozzle should be held at approximate distance of 0.45 to 0.50 meter moved back and forth to ensure Complete and even coverage.

CONSUMPTION

SYSCURE 985 gives coverage of 4 – 6 Sq .Mts per Ltr by brush application (or) 7 Sq.Mts per Ltr by Spraying.

PRECAUTIONS

All tools and equipment has to be washed thoroughly with fresh water. SYSCURE 985 is non toxic. Contact with eyes, skin should be avoided. When it falls in to the eyes it should be washed with plenty of fresh water and medical advise to be taken.

SUPPLY:

1 Liter, 5 Liters, 20 Liters and 200 Liters. 

SHELF LIFE

1 Year, if stored in cool and dry place.

TECHNICAL SUPPORT

Technical information and guidance regarding SYSPLAST range of Admixtures, SYSCOAT range of Epoxy and Water Proofing Systems, SYSGROUT range of Grouts can be obtained from the technical cell of SYSCONS .

NOTE

Information in this technical data sheet is to best of our knowledge true and accurate. However such conditions under which our products may be used or obtained beyond our control, recommendations are made without Warranty or Guarantee.