Concrete Admixtures

DESCRIPTION

SYSPLAST 251 is a high quality Water reducing admixture based on specially selected Lignosulphonates, which provide excellent Quality to concrete.

FUNCTION

SYSPLAST 251 induces unidirectional, negative charges on the surface of cement particles, because of which they repel each other resulting in better dispersion or better workability.

ADVANTAGES

• Excellent Workability, hence provides very high strength concrete.
• Slight inbuilt retardation helps for slump retention and avoid cold joints.
• High degree of dispersion thus provides free flow concrete, by eliminating segregation, bleeding etc.
• It gives excellent impermeability & overall increase in durability.
• Chloride free, hence no corrosion.
• Compatible with all types of OPC, PPC, GGBFS, PEA Silica fume etc.

PHYSICAL PROPERTIES
Physical form:Brown Liquid.
Chloride content:Nil.
Air entrainment:1% to 2% additional air over reference concrete.
DOSAGE

SYSPLAST 251 normal dosage is 100 ml to 150 ml per 50 Kg bag of Cement, whereas site trials with locally available concrete ingredients determine the actual dosage required at site.

USES

SYSPLAST 251 is used
• To provide high strength concrete.
• Reduce Bleeding, Segregation and excellent cohesion.
• Better Workability without loss of Strength.
• To get very high levels of impermeability and durability.
• Pumpability and Cement savings.

LAB TRAILS

Sand (Zone II, IS 383-1970), Cement: OPC 43 Grade = 320 Kg/m 3.
Course aggregate (20 mm to 5 mm, IS 383 – 1970)

SL NoDescriptionDosage in Litre/
50 Kg bag of cement
W/C RatioSlump in mmCompressive Strength In N/mm 2
1 Day   7Days   28 Days
1Reference concreteNil0.5655mm15         22         31.3
2Workability enhanced0.140.5595mm15         21         31.5
3Strength enhanced0.140.5555mm15.8      25         36.3
STANDARDS

SYSPLAST 251 complies with IS 9103 — 1979, IS 2645 – 1975 and ASTM C – 494 type ” A ” admixture.

PACKING:

1 Litre, 5 Liters, 20 Liters & 200 Liters.

SHELF LIFE:

1 year when stored under cool and dry place.

PRECAUTIONS:

SYSPLAST 251 should be used only at the recommended dosage levels. Higher dosage may result in increased retardation compared to normal concretes, also may result in higher air entrainment and hence lesser strength.

Contact with skin has to be avoided and any splashes on to the eyes should be immediately washed with plenty of fresh water and medical advice has to taken. Concrete made with SYSPLAST 251 has to be cured as per normal standard procedures.

TECHNICAL SUPPORT

Technical support regarding the SYSCOAT range of Epoxy and Water Proofing Coatings, SYSGROUT range of Grouts can be obtained from Technical cell of SYSCONS.

NOTE

Information in this technical data sheet is to the best of our knowledge true and accurate. However such conditions under which our products may be used or obtained beyond our control, recommendations are made without warranty or Guarantee.

DESCRIPTION

SYSPLAST 252 is a Concrete set Retarding and Water reducing admixture based on specially selected Lignosulphonates, which provide excellent Quality to concrete. It enhances the Workability and also delays the set rate of Concrete.

FUNCTION

SYSPLAST 252 induces unidirectional, negative charges on the surface of cement particles, because of which they repel each other resulting in better dispersion or better workability.

ADVANTAGES

• Excellent Workability, hence provides very high strength concrete.
• Improved Quality of Concrete & Improved finish.
• Slight inbuilt retardation helps for slump retention and avoids cold joints.
• Delays the setting time and helps in situations where there are extended placing times of Concrete.
• High degree of dispersion thus provides free flow concrete, by eliminating segregation, bleeding etc.
• It gives excellent impermeability & overall increase in durability.
• Chloride free, hence no corrosion.

DOSAGE

SYSPLAST 252 normal dosage is 100 ml to 250 ml per 50 Kg bag of Cement, whereas site trials with locally available concrete ingredients determine the actual dosage required at site. An over dosage of SYSPLAST 252 will give higher retardation but the ultimate strength will not be reduced.

USES

SYSPLAST 252 is used
• To provide high strength concrete.
• Reduce Bleeding, Segregation and excellent cohesion.
• Better Workability without loss of Strength.
• To get very high levels of impermeability and durability.
• Pumpability and Cement savings.

PROPERTIES
Physical form:Dark Brown Liquid.
Chloride content:Nil.
Air entrainment:1% to 2% additional air over reference concrete.
Specific Gravity:1.160.
LAB TRAILS

Sand (Zone II, IS 383-1970), Cement: OPC 43 Grade. Course aggregate (20 mm to 5 mm, IS 383-1970)

SL NoDescriptionDosage in Litre/
50 Kg bag of cement
W/C RatioSlump in mmCompressive Strength In N/mm 2
1 Day   7Days   28 Days
1Reference concreteNil0.5650mm15         22         32
2Workability enhanced0.150.56110mm15         22         32.5
3Strength enhanced0.150.4955mm16.5     24.2       37.4
STANDARDS

SYSPLAST 252 complies with IS 9103 — 1979, BS 5075— Part I and ASTM C -494 type “A” admixture.

PACKING:

1 Litre, 5 Liters, 20 Liters & 200 Liters.

SHELF LIFE:

1 Year when stored under cool and dry place.

PRECAUTIONS:

SYSPLAST 252 should be used only at the recommended dosage levels. Higher dosage may result in increased retardation compared to normal concretes, also may result in higher air entrainment and hence lesser strength.

Contact with skin has to be avoided and any splashes on to the eyes should be immediately washed with plenty of fresh water and medical advice has to taken.

Concrete made with SYSPLAST 252 has to be cured as per normal standard procedures.

TECHNICAL SUPPORT

Technical support regarding the SYSCOAT range of Epoxy and Water Proofing Coatings, SYSGROUT range of Grouts can be obtained from Technical cell of SYSCONS.

NOTE

Information in this technical data sheet is to the best of our knowledge true and accurate. However such conditions under which our products may be used or obtained beyond our control, recommendations are made without warranty or Guarantee.

DESCRIPTION

SYSPLAST 253 is a high quality, high range Water reducing admixture based on specially selected Sulphonated Naphthalene Polymers, which provide excellent plasticity to concrete.

FUNCTION

SYSPLAST 253 induces unidirectional, negative charges on the surface of cement particles, because of which they repel each other resulting in better dispersion or better workability.

ADVANTAGES

• Excellent Water reducing ability thus provides Ultimate strength concrete.
• Increased Workability, Pumpable Concrete.
• Very high degree of dispersion and hence provides free flow concrete, by eliminating segregation, bleeding etc.
• When water reducing ability is harnessed properly, it gives excellent impermeability & overall increase in durability.
• Chloride free, hence no corrosion.
• Compatible with all types of OPC, PPC, GGBFS, PFA Silica fume etc.

PHYSICAL PROPERTIES
Physical form:Brown Liquid.
Chloride content:Nil as per IS 456 & BS 5075.
Air entrainment:1% to 2% additional air over reference concrete.
DOSAGE

SYSPLAST 253 is a Super Plasticizer normally recommended at 250 ml to 750m1 per 50 Kg bag of cement, with proper site trails using locally available concrete ingredients, the dosage can be fixed even beyond this range of suit site requirements.

USES

SYSPLAST 253 is used.
• To provide high strength concrete.
• To make concrete for congested reinforcement areas.
• To make Pumpable Concrete.
• To get very high levels of impermeability and durability.
• To get high early strength as well as high ultimate strength in Precast elements.

LAB TRAILS

Cement content (OPC) (53 grade) = 475 Kg/m3.
Sand (Zone II, IS 383-1970) = 680 Kg/m3.
Course aggregate (20 mm to 5 mm, IS 383- 1970) = 1090 Kg/m3.

SL NoDescriptionDosage in Litre/
50 Kg bag of cement
W/C RatioSlump in mmCompressive Strength In N/mm 2
1 Day   7Days   28 Days
1Reference concreteNil0.4255mm30.0         42.0         51.1
2Workability enhanced0.40.42165mm31.0         42.8         51.2
3Strength enhanced0.40.3560mm34.5         49.2         60.3
STANDARDS

SYSPLAST 253 complies with IS 9103— 1979, BS 5075— Part 3 and ASTM C -494 type” F “admixture.

PACKING

1 Litre, 5 Liters, 20 Liters & 200 Liters.

SHELF LIFE

1 year when stored in cool and dry place.

PRECAUTIONS

SYSPLAST 253 is Non — Toxic, Non — Flammable. Should be used only at the recommended dosage levels.
Contact with skin has to be avoided and any splashes on to the eyes should be immediately washed with plenty of fresh water and medical advice has to taken. Concrete made with SYSPLAST 253 has to be cured as per normal standard procedures.

TECHNICAL SUPPORT

Technical support regarding the SYSCOAT range of Epoxy and Water proofing Coatings, SYSGROUT range of Grouts can be obtained from Technical cell of SYSCONS .

NOTE

Information in this technical data sheet is to the best of our knowledge true and accurate. However such conditions under which our products may be used or obtained beyond our control, recommendations are made without Warranty or Guarantee.

DESCRIPTION

SYSPLAST 254 is a high quality, high range Water reducing admixture based on specially selected Organic polymers, which provide excellent plasticity to concrete.

FUNCTION

SYSPLAST 254 induces unidirectional, negative charges on the surface of cement particles, because of which they repel each other resulting in better dispersion or better workability.

ADVANTAGES

• Excellent water reducing ability (In the range of 15% to 25%) hence provides very high strength concrete.
• Slight inbuilt retardation helps for slump retention and avoid cold joints.
• Very high degree of dispersion and hence provides free flow concrete, by eliminating segregation, bleeding etc.
• When water reducing ability is harnessed properly, it gives excellent impermeability & overall increase in durability.
• Chloride free, hence no corrosion.
• Compatible with all types of OPC, PPC, GGBFS, PFASilica fume etc.

PHYSICAL PROPERTIES
Physical form:Brown Liquid.
Chloride content:Nil.
Air entrainment:1% additional air over reference concrete.
DOSAGE

SYSPLAST 254, a Super Plasticizer normally recommended at 250 ml to 750 ml per 50 Kg bag of cement. With proper site trails using locally available concrete ingredients, the dosage can be fixed even beyond this range of suit site requirements.

USES

SYSPLAST 254 is used
• To provide high strength concrete.
• To produce high slump (free flow) concrete.
• To get large cement reductions.
• To get very high levels of impermeability and durability.
• To get high early strength as well as high ultimate strength in precast elements.

LAB TRAILS

Cement content (OPC) (53 grade) = 400 kg/m3.
Sand (Zone II, IS 383-1970) = 742 Kg/m3.
Course aggregate (20 mm to 5 mm, IS 383-1970) = 1092 kg/m3.

SL NoDescriptionDosage in Litre/
50 Kg bag of cement
W/C RatioSlump in mmCompressive Strength In N/mm 2
1 Day   7Days   28 Days
1Reference concreteNil0.580mm12         28.0         41.5
2Workability enhanced0.450.5Free Flow11.5       31.0         42.0
3Strength enhanced0.450.4180mm18.0       43.0         58.2
STANDARDS

SYSPLAST 254 complies with IS 9103 — 1979, BS 5075— Part 3 and ASTM C -494 type” F ” admixture.

PACKING

1 Litre, 5 Liters, 20 Liters & 200 Liters.

SHELF LIFE

1 Year when stored under cool and dry place.

PRECAUTIONS

SYSPLAST 254 should be used only at the recommended dosage levels. Higher dosage may result in increased retardation compared to normal concretes, also may result in higher air entrainment and hence lesser strength.

Contact with skin has to be avoided and any splashes on to the eyes should be immediately washed with plenty of fresh water and medical advice has to taken. Concrete made with SYSPLAST 254 has to be cured as per normal standard procedures.

TECHNICAL SUPPORT

Technical support regarding the SYSCOAT range of Epoxy and Water proofing Coatings, SYSGROUT range of Grouts can be obtained from Technical cell of SYSCONS .

NOTE

Information in this technical data sheet is to the best of our knowledge true and accurate. However such conditions under which our products may be used or beyond our control, recommendations are made without Warranty or Guarantee.

DESCRIPTION

SYSPLAST 255 is a Concrete Super Plasticizer. On additional to concrete it disperses the cement particles i.e. enhances the workability and also gives high retardation. The special formulation is based on modified Sulphonated naphthalene formaldehyde.

ADVANTAGES

• Improves workability.
• Increased strength.
• Improved Quality.
• Gives high Retardation for mass concreting in hot weather conditions.
• It has high “Slump retaining ability”.

The Ultimate strengths that are given by SYSPLAST 255 are very high. SYSPLAST 255 has “unique” place in pumpable concrete industry, ready mix concrete production situations.
SYSPLAST 255 when used as water reducing agent gives extraordinary Ultimate strengths.

STANDARDS

SYSPLAST 255 complies to ASTM-C 494 Type ‘G’ category as a Super Plasticizing and retarding admixture.

PROPERTIES
Color:Brown Liquid.
Specific Gravity:1.190 to 1.210 at 30 degrees Centigrade.
Air entrainment:Approximately 1% additional air over reference concrete.
METHOD OF USAGE

SYSPLAST 255 can be used with all standard cement types. SYSPLAST 255 of required quantity should be added to a part of gauging water before mixing with concrete made with remaining gauging water for better results. The concrete should be mixed for at least a minute after addition of SYSPLAST 255 . Attention should be paid to ASTM, BS, DIN, and IS specifications relating to mixing time and general conditions for production, application and curing of concrete.

DOSAGE

The normal dosage range is 0.2 to 0.7 liters per 50 Kgs of cement. The optimum dosage and compatibility of the admixture has to be ascertained by proper site trials. An over dosage of SYSPLAST 255 will lead to retardation as per the formulation. The initial strength i.e. 1 day will be less, where as 3 days, 7 days and ultimate strengths will not be affected. In fact they are improved.

TRIAL RESULT

M-40 Mix constituents.

Cement:OPC 53 Grade (IS 12269-1987).
Sand:40% (IS 383 – 1970 Zone II).
Aggregate:60% (IS 383-1970).
Cement Content:475 Kg/m3.
SL NoDescriptionDosage in Litre/
50 Kg bag of cement
W/C RatioSlump in mmCompressive Strength In N/mm 2
1 Day   7Days   28 Days
1Reference concreteNil0.4360215         360         480
2Plasticised0.50.43100180         340         540
3Strength enhanced0.50.3555260         510         655

Retardation by vibration at 35 Degree Centigrade — 4 – 5 hours.

PRECAUTIONS:

SYSPLAST 255 is non toxic, non flammable. Splashes on to the eyes have to be immediately washed with plenty of water and medical advice has to be taken.

SUPPLY:

SYSPLAST 255 is supplied in 1Litre, 5Litres, 20Litres, & 200 Litres.

Shelf Life :

1 Year from the date of Manufacture.

TECHNICAL SUPPORT

Technical information and guidance regarding SYSPLAST range of Admixtures, SYSBOND range of Epoxy, S.B.R and Acrylic Bonding agents, SYSGROUT range of Grouts can be obtained from the technical cell of SYSCONS.

NOTE

Information in this Technical data sheet is to the best of our knowledge true and Accurate. However such conditions under which our products may be used or obtained beyond our control, recommendations are made without Warranty or Guarantee.

DESCRIPTION

SYSPLAST 258 is a Specially formulated admixture for optimum performance as a cement saver under the manufacturing conditions encountered in the Concrete Block, Paving Block and Brick Industries.
SYSPLAST 258 is a straw colored liquid which can improve the properties of mix.
SYSPLAST 258 produces a highly dispersive action among cement particles by air entrainment, resulting in improved cohesion and other properties.

ADVANTAGES

• Cohesiveness of the mix is significantly Increased because of the improved Workability and Air Entrainment.
• Reduction of Impermeability.
• More Durable.
• Unique formulation enhances the effectiveness over full range of operating conditions.
• Improves Bond to all surfaces and reduces Shrinkage Cracks.
• Reduces Green Stage Breakages.
• SYSPLAST 258 can be used with all cement types.

PROPERTIES
Color:Straw.
Specific Gravity:1.04 to 1.06 at 27 Degrees Centigrade.
Chloride Content:Nil.
METHOD OF USAGE

Normally SYSPLAST 258 is supplied ready to use and for best results should be added during the mixing cycle at the same time as the water. The Optimum dosage is best determined by site trials.
As a guide a Dosage of 200 ml per 50 Kgs bag of Cement (Approx. 0.4%) is normally recommended.
Trial Results: (Can be taken as a reference only)

ParticularsSYSPLAST 258
Dosage
28 Day Compressive Strength
Kg/Sq.cm.
ControlNil38     Mix done with 53 Grade Cement
8% Cement
Reduction
0.15040    C:S:C.A : 1:4:8 in Solid Blocks
of 200mm x 200mm x 400mm.
10% Cement
Reduction
0.20038.5    C:S:C.A : 1:4:8 in Solid Blocks
of 200mm x 200mm x 400mm.

SYSPLAST 258 can be mixed either with the water used for Production of Blocks or it can be used separately on wet mix in each batch.

PACKING:

5 Liters, 20 Liters, 200 Liters.

SHELF LIFE

1 Year when stored in cool and dry place.

PRECAUTIONS

SYSPLAST 258 is Non – Toxic & Non – Flammable.
Contact with Skin should be avoided and any splashes on to the eyes should be immediately washed with plenty of fresh water and medical advice has to be taken.

TECHNICAL SUPPORT

Technical information and Guidance regarding SYSGROUT range of Cementitious and Epoxy Grouts, SYSCOAT range of Epoxy and Water Proofing Systems can be obtained from the technical cell of SYSCONS.

NOTE

Information in this Technical data sheet is to the best of our knowledge true and Accurate. However, such conditions under which our Products may be used or obtained beyond our control recommendations are made without Warranty or Guarantee.

DESCRIPTION

SYSPLAST 259 is a Specially formulated admixture to Plasticise Mortar mixes. On addition to mortar it not only Plasticises but also impart water proofing characteristics to the applied surfaces.
SYSPLAST 259 is based on specially selected chemicals which can improve the properties of Mortar.
SYSPLAST 259 produces a highly dispersive action among cement particles by air entrainment, resulting in improved cohesion and other properties.

ADVANTAGES

• Cohesiveness of the Mortar is significantly Increased because of the improved Workability and Air Entrainment.
• Reduction of Impermeability.
• More Durable.
• Unique formulation enhances the Mortar set time allowing extending working time.
• Improves Bond to all surfaces and reduces Shrinkage Cracks.
• SYSPLAST 259 gives mortars improved Freeze -Thaw resistance.
• Increases Yield of Mortar.
• Increase in Coverage area.
• SYSPLAST 259 speeds up Plastering and reduces the Rebound loss.

PROPERTIES
Colour:Straw.
Specific Gravity:1.01 to 1.05 at 30 Degrees Centigrade.
Chloride Content:Nil.
METHOD OF USAGE

SYSPLAST 259 can be used with all standard Cement types. Usually dilute the required amount of SYSPLAST 259 and mix it with dry mortar mix. If that is convenient SYSPLAST 259 of required quantity can be added directly to wet concrete mix and uniformly mixed.
Attention should be paid to the standard practices of preparing and rendering of plasters and their curing.

DOSAGE

The normal dosage ranges from 130 ml to 180 ml per 50 Kg bag of Cement. The optimum dosage and compatibility of SYSPLAST 259 with locally available materials has to be ascertained by proper site trails. Advantage of SYSPLAST 259 should be taken to reduce water and keep it to minimum.

PACKING

1 Litre, 5 Litres, 20 Litres, 200 Litres.

SHELF LIFE

1 Year when stored in cool and dry place.

PRECAUTIONS

SYSPLAST 259 is Non – toxic. SYSPLAST 259 has to be used only in the recommended dosage range, as higher dosages may result in heavy air entrainment and hence reduced strength of the cement mortars.
Cement sand mortar mixed with SYSPLAST 259 has to be cured as per normal standard procedures.
Contact with Skin should be avoided and any splashes on to the eyes should be immediately washed with plenty of fresh water and medical advice has to be taken.

TECHNICAL SUPPORT

Technical information and guidance regarding SYSGROUT range of Cementitious and Epoxy Grouts, SYSCOAT range of Epoxy and Water Proofing Systems, can be obtained from the technical cell of SYSCONS.

NOTE

Information in this Technical data sheet is to the best of our knowledge true and Accurate. However such conditions under which our products may be used or obtained beyond our control, recommendations are made without Warranty or Guarantee.

DESCRIPTION

SYSPLAST 260 is a Liquid Accelerator which is turbid light pale, chloride free concentrated liquid and is introduced through the spraying nozzle to provide a rapid setting of the cement.

ADVANTAGES

• SYSPLAST 260 provides rapid setting of Sprayed Concrete.
• Used for Wet sprayed concrete processes.
• Non – flammable.
• Used for single pass spraying for thick coatings.
• Can be used in Overhead areas.
• Gives minimum Rebound Loss.

PROPERTIES
Color:Turbid Light Pale liquid.
Characteristics:Chloride free.
Specific Gravity:1.3 to 1.4 at 30 degrees Centigrade.
Compatibility:Compatible with OPC, PPC & LowAlkali cement.
USES

SYSPLAST 260 when used in sprayed Concrete & Mortar processes provide rapid setting thereby allowing very fast build up on the work face. This ability is of particular advantage when spraying concrete in the critical overhead area. It is available for wet sprayed concrete process.

PERFORMANCE

As perASTM C — 266 -74, Gilmore Needle Apparatus
Initial Setting Time :   Less than 3 Minutes.
Final Setting Time  :   Less than 9 Minutes.

Preparation of cement paste for testing was done as perASTM C — 187-74.

Stiffening occurs after approximately 10 seconds. As usual with rapid initial Acceleration of the cement Hydration process the 28 day Compressive strength will be reduced by approximately 25%.

METHOD OF USAGE

Required volume of SYSPLAST 260 liquid should be diluted depending upon the site conditions. This will help rapid dispersion in to the mix and the solution will be normally introduced directly after the airing in the spray nozzle. In order to obtain a consistent supply of the admixture at the nozzle, a proper mechanical delivery system is recommended.
Effect of over dosage will lead to very rapid setting of the mix before it reaches the sprayed surface with consequent loss of strength.

CONSUMPTION

The combined product has to be applied at 2% to 7% by weight of Cement.

SPILLAGE & FIRE

Wash with Water. Being Water based it is Non — Flammable.

PRECAUTIONS

SYSPLAST 260 liquid is alkaline. Consequently gloves & Eye protection should be worn. If it splashes on to eyes they have to be immediately washed with water and medical advice to be taken. Prolonged contact with skin should be avoided. If swallowed drink plenty of Water followed by diluted vinegar or lemon juice. The treatment should be completed by drinking milk or olive oil. Medical attention should be Sought.

SHELF LIFE

12 Months in unopened packs if kept in dry condition

SUPPLY

Available in 1 Litre, 5 Litres, 20 Liters & 200 Liters Containers.

TECHNICAL SUPPORT

Technical information and guidance regarding SYSPLAST range of Admixtures, SYSBOND range of Epoxy, S.B.R and Acrylic Bonding agents, SYSGROUT range of Grouts can be obtained from the technical cell of SYSCONS.

NOTE

Information in this Technical data sheet is to the best of our knowledge true and Accurate. However such conditions under which our products may be used or obtained beyond our control, recommendations are made without Warranty or Guarantee.

DESCRIPTION

SYSPLAST IWL is a high quality Water proofing liquid based on specially selected organic polymers, designed to provide excellent Waterproofing for Concrete and Mortar.
SYSPLAST IWL improves the waterproof ness and durability of concrete, cement mortar by its hydrophobic nature, air entrainment and water reducing ability.

ADVANTAGES

• Improves workability, cohesion of the mix even ata reduced water cement ratio.
• Improves waterproof ness by reduction of permeability of concrete or mortar.
• As it is in liquid form it spreads uniformly & easily with the other ingredients of concrete / mortar mix.
• Chloride free, does not cause corrosion.
• Compatible with all types of OPC, PPC PFA, GGBFS Silica fume etc.
• Overall quality of concrete is improved very much because of SYSPLAST IWL.

PHYSICAL PROPERTIES
Physical Form:Brown liquid.
Chloride Content:NIL as per IS 456 and BS 5075.
Setting time:Does not affect the setting time at normal dosage.
STRENGTH

Strength is neither increased nor decreased when compared to reference concrete. But when adequate water reduction is done strength may even improve.

STANDARDS

SYSPLASTIWL confirms to IS 2645—2003.

DOSAGE AND USAGE

SYSPLAST IWL is a high quality plasticiser cum water proofing liquid. The normal recommended dosage is 100mI per 50 kg bag of cement.

SYSPLAST IWL has to be added on to wet concrete mix for best results. In other words, after adding and mixing about 85% to 90% of total mixing water with other ingredients of concrete, SYSPLAST IWL is diluted in the remaining water and added on to the already mixed, wet concrete. Now the entire batch of concrete is mixed again thoroughly to ensure uniform spreading of SYSPLAST IWL. When its water reducing ability is judiciously utilized SYSPLAST IWL gives high impermeable and durable concrete.

SYSPLAST IWL is designed for normal concretes / mortars up to M20 grade. For higher grades, especially while making structural members, precast elements etc proper trials should be done to fix its dosage before actually the material is used.For getting best results the water reducing ability of SYSPLAST IWL has to be harnessed.Generally for a dosage of 100 ml/bag of 50 Kgs, 8 %to 10% water reduction would suffice.

USES

General concrete works such as Roof slabs, Sunken slabs, BaIconies, Watertanks, Basements etc & wherever there is requirement for waterproofing and high quality concrete.

PACKING

1 Litre, 5 Litres, 20 Litres, 200 Litres.

SHELF LIFE

1 Year when stored in cool and dry place.

PRECAUTIONS

SYSPLAST IWL should be used only at the recommended dosage levels. Higher dosages may result in retardation compared to normal concrete, also may result in higher air entrainment and hence lesser strength.
Contact with Skin should be avoided and any splashes on to the eyes should be immediately washed with plenty of fresh water and medical advice has to be taken.

TECHNICAL SUPPORT

Technical information and guidance regarding SYSPLAST range of Admixtures, SYSCOAT range of Epoxy and Water Proofing Systems, can be obtained from the technical cell of SYSCONS.

NOTE

Information in this Technical data sheet is to the best of our knowledge true and Accurate. However such conditions under which our products may be used or obtained beyond our control, recommendations are made without Warranty or Guarantee.